Sobetracom

Equipment sourcing · Mobility

Buying construction machinery for a project in Africa: safety, engines and transport

A loader, grader or compaction roller for an African site is rarely bought off the shelf. The choice depends on the task, the ground, the fuel available and how the machine will reach the site, often by breakbulk vessel followed by an abnormal-load convoy. Specification mistakes are expensive: parts that cannot be found, an engine that does not tolerate local diesel, a machine stuck at the port for lack of lifting gear.

This guide draws on European and international safety standards for earth-moving machinery, EU rules on non-road engines and the Logistics Cluster's logistics guide.

Updated on 21 October 2026

The safety baseline: EN 474 and EN ISO 6165

In Europe, earth-moving machinery falls under Machinery Directive 2006/42/EC and the EN 474 series. Its general part, EN 474-1:2022, sets the requirements common to the machines described in EN ISO 6165:2012 and is used together with the family-specific parts, EN 474-2 to EN 474-13. Citing the part that matches the machine requested, whether loader, excavator or grader, gives the tender a precise and enforceable basis for comparison, including when the machine is built outside Europe.

A protected cab: ROPS and FOPS

On a sloping site or in a quarry, the cab must protect the operator. ISO 3471 sets requirements for roll-over protective structures (ROPS) on seated-operator machines of 700 kg and above: dozers, loaders, backhoe loaders, dumpers, graders, rollers and trenchers among them. ISO 3449 covers falling-object protective structures (FOPS); it excludes some families, such as excavators, and machines rated below 15 kW. The specification should require a ROPS cab, and FOPS where the site calls for it, together with the matching test certificate.

Stage V or export engine: fuel decides

Engines sold in the EU follow Stage V, in force since 2019 or 2020 depending on power. DieselNet explains that its particle number limits require a diesel particulate filter on all affected diesel engines between 19 and 560 kW. In Europe these engines run on non-road diesel capped at 10 mg/kg of sulphur since 2011.

On site, conditions can be very different. In Ghana, for example, a 3-year waiver granted in January 2022 and running to 31 December 2024 allowed fuel from local refineries to carry up to 1,500 mg/kg of sulphur, against 50 mg/kg in the ECOWAS standard. Before ordering, ask the manufacturer whether the machine offered is warranted on the diesel actually available at the site, and in which engine version.

Shipping: plan for out-of-gauge cargo from the start

The Logistics Cluster notes that, for machinery, the shipper needs exact external dimensions and the manufacturer's handling specifications, and that a suitable breakbulk vessel is not always available on the right route. As a benchmark, a 20 ft flat rack offers a payload of 27,580 kg with an internal length of 5.898 m and width of 2.236 m. Wider or heavier machines go breakbulk or ro-ro, and inland haulage then needs abnormal-load permits. That data should be requested from manufacturers alongside the price.

How Sobetracom organises the purchase

Sobetracom turns the site's task into a specification: machine family and applicable EN 474 part, ROPS or FOPS cab, an engine version suited to local fuel, wear-part kits and operator training. It approaches several manufacturers and dealers, compares offers delivered to site, arranges pre-shipment inspection and coordinates out-of-gauge transport with the forwarder. Import and road-use rules for machinery differ between countries, so they should be checked with the licensed clearing agent before ordering.

Frequently asked questions

Can a Stage V machine run on the diesel sold in West Africa?
That depends on the fuel actually on sale. A Stage V engine is designed for European non-road diesel capped at 10 mg/kg of sulphur, whereas a waiver granted in Ghana in 2022 allowed up to 1,500 mg/kg. Get the manufacturer to confirm compatibility in writing before ordering.
Will a loader fit in a container?
Small machines can travel on a flat rack, the 20 ft version of which takes a 27,580 kg payload with an internal width of 2.236 m. Larger machines go breakbulk or ro-ro. The dimensions and lifting points supplied by the manufacturer let the forwarder decide.

Sources

  1. EVS, fiche EVS-EN 474-1:2022 (April 2022)
  2. EVS, fiche EVS-EN ISO 3471:2008 (2008)
  3. EVS, fiche EVS-EN ISO 3449:2008 (2008)
  4. DieselNet, EU: Nonroad Engines (October 2026)
  5. DieselNet, EU: Fuels (October 2026)
  6. Ghanaian Times, « NPA waives specification on quantity of sulphur in petrol, diesel products » (January 2022)
  7. Logistics Cluster (WFP), LOG, Cargo Configuration Sea Shipping (2022)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.