Sobetracom

Equipment sourcing · Mobility

Buying electric vehicles for a project in Africa: charging, standards and import rules

Electric vehicles are no longer a novelty in project fleets in Africa. In some countries they are becoming the only option: Ethiopia has banned imports of fully built combustion-engine cars and extended the rule to diplomatic missions and international organisations. Elsewhere, as in Rwanda, exemptions make electric attractive.

Buying an EV for Africa still needs preparation that a diesel vehicle does not: charging compatibility, site power supply, technicians and parts. This guide covers the charging standards to cite, the import rules on record and the points to watch.

Updated on 21 October 2026

Ethiopia: when electric becomes compulsory

According to CleanTechnica, Ethiopia bans imports of fully built combustion-engine passenger cars and motor tricycles, a ban restated in 2024 in a Finance Ministry letter to the Customs Commission; only kits for local assembly are still allowed. Citizen Digital reports that a Foreign Affairs Ministry statement dated 19 August, sent to diplomatic and consular missions and international organisations in Addis Ababa, bans the import of petrol and diesel vehicles.

For an NGO or agency equipping an Ethiopian office, the question is no longer whether to go electric but how to keep the vehicles running. The same CleanTechnica article notes complaints about the shortage of public charging stations, service centres and trained technicians.

Rwanda: exemptions that change the sums

According to the e-mobility guide published by law firm Cliffe Dekker Hofmeyr, Rwanda exempts electric vehicles, their spare parts, batteries and charging equipment from import and excise duties, zero-rates them for VAT and exempts them from withholding tax. The country also offers rent-free public land for charging stations, charging provisions in the building code and a preference for EVs among government-hired vehicles. For buyers this shifts the comparison with a combustion vehicle, provided the regime is confirmed to apply to the model and the import date.

Charging standards to write into the specification

Charging rests on 2 standards that should be stated explicitly. IEC 62196-2 covers plugs and connectors for AC conductive charging, up to 480 V, 50 Hz to 60 Hz, 63 A three-phase or 70 A single-phase. IEC 61851-1 covers vehicle supply equipment, up to 1 000 V AC or 1 500 V DC. Requiring these references, along with the chosen connector type, ensures that a vehicle, cable and charger bought separately will work together. The local grid frequency and the power actually available on site belong in the request for offers.

Power, technicians and parts: the real constraints

A project EV is only as good as its charging point. Where the site relies on an unstable grid or a generator, the charger, electrical protection and possibly a solar installation are part of the purchase. The technician shortage reported in Ethiopia applies elsewhere too: the contract should include mechanic training, diagnostic tools and a parts batch, especially for EV-specific components. The battery also shapes shipping: moving an electric vehicle follows specific rules that the forwarder must confirm before booking.

Sobetracom's method for an electric purchase

Sobetracom writes the specification with the buyer from actual use: range needed, charging available, connector type and the IEC standards to meet. It approaches several manufacturers and dealers, compares offers with chargers, cables, training and parts included, has compliance checked before shipment and follows the delivery through to commissioning. EV import rules are changing fast in Africa, so every exemption or ban should be reconfirmed with the licensed clearing agent in the destination country before ordering.

Frequently asked questions

Can an international organisation still import a diesel off-roader into Ethiopia?
According to Citizen Digital, a statement from Ethiopia's Foreign Affairs Ministry dated 19 August, addressed to diplomatic missions and international organisations, bans imports of petrol and diesel vehicles. Have the licensed clearing agent confirm the rule in force at the time of import before buying.
Which standard should the charger meet?
IEC 61851-1 for the supply equipment and IEC 62196-2 for AC plugs and connectors. The connector type must match across vehicle, cable and charger, which should be checked on the data sheets before ordering.

Sources

  1. EVS, fiche EVS-EN IEC 62196-2:2022 (2022)
  2. EVS, fiche EVS-EN IEC 61851-1:2019 (July 2019)
  3. CleanTechnica, « Ethiopia Says ICE Vehicle Import Ban Continues As Part of New Economic Reforms, Only EV Imports Allowed! » (July 2024)
  4. Citizen Digital, « Ethiopia bans import of fuel-powered vehicles by foreign missions in EV push » (August 2024)
  5. Cliffe Dekker Hofmeyr, E-Mobility in Africa, « Electric vehicle policies in Rwanda » (October 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.