Sobetracom

Export practical guide

LCL groupage or a full container (FCL) for shipments to Africa

A sea shipment either travels in a container booked for it alone (FCL, full container load) or shares one with other goods (LCL, less than container load). Volume drives the choice first, but for Africa it also affects how often the cargo is handled, how pre-shipment inspection works and which documents are issued.

This guide draws on explanations from the forwarder SEKO Logistics and from Marine Insight, on Hapag-Lloyd's container specification and on the requirements of one African inspection programme.

Updated on 21 October 2026

Flat rate or space used

With FCL, the shipper pays a flat rate for the whole container, whether it is full or not. With LCL, the shipper pays only for the space used, under the W/M (weight or measurement) rule: freight is charged on whichever is higher, volume in cubic metres or weight in tonnes. A light but bulky pallet pays for its volume; a crate of metal parts pays for its weight.

SEKO puts the tipping point at around 13 to 15 m³, where the flat rate for a 20 ft box matches or beats the cost of consolidation, depending on the trade lane and warehouse tariffs. A standard 20' holds 33.2 m³ at Hapag-Lloyd, so a half-full container can already work out cheaper than LCL. A large project consignment, such as the roughly 10 km of water pipes, fittings and tools Sobetracom supplied to CASOBU in Burundi, is FCL by nature; a top-up of spare parts rarely is.

How often the cargo is handled

A full container is stuffed once at origin and sealed, and the seal is not broken until arrival. LCL cargo goes through a consolidation warehouse at origin and a deconsolidation warehouse at destination: SEKO counts at least 4 handling steps, from receipt at the warehouse to final sorting. Each one is a chance for breakage, loss or misrouting.

For fragile goods, measuring instruments or medical equipment, that handling matters as much as price. LCL also calls for fuller marking, since every package must stay identifiable once separated from the rest, whereas in FCL the seal is the boundary.

One bill of lading per consignment

In groupage, the operator, often an NVOCC, issues a house bill of lading to each customer and receives the master bill of lading from the shipping line. Every consignment in a groupage container therefore has its own transport document.

That is the document the buyer will present for clearance, and the one on which the electronic pre-arrival formalities required by several African countries are based. The house bill must match the importer's name, the description and the invoice references exactly.

Inspection and seals: the DR Congo example

The pre-export verification programme described by Bureau Veritas for DR Congo requires the inspector to witness loading and full containers to be sealed. The same applies to a consolidated full container combining one exporter's goods for one consignee, which is inspected at the place of consolidation. Destination inspection is not allowed.

That is another reason to bring a project's orders together into one container loaded under supervision, rather than scattering them across several LCL shipments. SEKO calls this a buyer's consolidation: goods from several suppliers are combined at origin and the container travels sealed to a single consignee.

Deciding with the forwarder

Where it makes sense, Sobetracom brings together orders from several European manufacturers for the same buyer, to fill a container and reduce handling. Groupage rates, consolidation lead times and inspection rules vary by lane and country, so the comparison is made with the buyer's forwarder, and the licensed broker confirms what customs expects for a consolidated shipment.

Frequently asked questions

At what volume does a full container become worthwhile?
SEKO puts the threshold at around 13 to 15 m³ for a 20 ft box, but it varies with the lane and warehouse tariffs. Ask for both prices whenever a shipment approaches that volume.
Can orders from several suppliers share one container?
Yes, through a buyer's consolidation: goods are combined at a warehouse at origin and the container travels sealed to the consignee. For DR Congo, inspection then takes place at the place of consolidation.
Is LCL slower?
Often, because of waiting for consolidation at origin and deconsolidation at destination. The real lead time depends on how frequently groupage sailings run on the lane, which the forwarder can confirm.

Sources

  1. SEKO Logistics, « FCL vs LCL: How to Choose the Right Ocean Freight Strategy » (August 2026)
  2. Marine Insight, « What is Groupage in Shipping? » (October 2026)
  3. Bureau Veritas, fiche « Pre-export verification of imports for the Democratic Republic of Congo » (Rev. 26, 06/2024) (June 2024)
  4. Hapag-Lloyd, « Container Specification » (October 2026)
  5. Sobetracom, références clients (September 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.