Sobetracom

Export practical guide

Tropicalising equipment for Africa: heat, humidity and dust

Equipment designed for a European workshop or laboratory does not face the heat, humidity or dust it will meet in tropical or Sahelian regions. Tropicalisation is the umbrella term for the changes that help it cope: a better sealed enclosure, components protected against condensation and corrosion, and packaging designed for the journey.

The word has no single standard definition. To use it in a specification, it has to be turned into measurable requirements. This guide draws on International Electrotechnical Commission standards, a test laboratory and the German insurers' transport information service.

Updated on 21 October 2026

Turning tropicalised into an IP rating

IEC 60529 classifies the degrees of protection provided by enclosures for electrical equipment up to 72,5 kV. Its IP code has 2 digits. The first covers solid objects: 5 means protected against harmful dust, 6 totally protected against dust. The second covers water: 3 for spray up to 60° from vertical, 4 for splashing from any direction, 5 for a low-pressure jet.

For an electrical cabinet in a dusty plant room, or a field device exposed to downpours, asking for a specific IP rating works better than a general reference to a tropical version. The supplier should then provide the matching test certificate.

Damp heat is a standard test

Condensation is electronics' main enemy in hot, humid climates. IEC 60068-2-30, whose 4th edition was published in 2025, subjects components and equipment to high humidity combined with 12 h + 12 h temperature cycles, which usually produce condensation on their surface. It assesses suitability for use, transport and storage, and can also be used to validate packaging.

Asking the manufacturer whether the equipment, or its circuit boards, has passed this test is a simple question that separates a genuinely adapted product from a standard one. For IT and broadcast equipment, like the kit Sobetracom supplied to a television operator in Guinea, or for electrical measuring equipment, like that delivered in DR Congo for an AFD-backed project, it is worth raising at the enquiry stage.

The journey tests equipment before installation

The German insurers' Transport Information Service (TIS) notes that the air inside a brown container can reach about 50 °C when it is about 25 °C outside, against about 38 °C in a white container. Moisture released by the cargo and its packaging as the temperature rises then condenses on walls cooled overnight and drips back onto the goods.

The main moisture sources are the cargo itself, its packaging, the wooden floor and timber dunnage. TIS advises loading goods as dry as possible; sealed covers, desiccants and anti-corrosion packaging add protection. For sensitive equipment, a refrigerated container, which Hapag-Lloyd designs to hold temperature in ambient conditions up to 50 °C, is an option worth considering.

Writing the specification

A useful specification states the required IP rating, the climatic tests expected, the operating temperature and humidity range, circuit board protection and the packaging method. It avoids vague wording that cannot be checked on delivery.

Sobetracom passes these requirements to the manufacturers it consults, compares their answers point by point and asks for test certificates before the order. Real conditions depend on the site, installation and maintenance, so the end user and the project engineer should approve the specification, and the forwarder should confirm packaging precautions before dispatch.

Frequently asked questions

Is IP5X equipment suitable for a dusty site in Africa?
A first digit of 5 means protected against harmful dust, not fully dust-tight, which is what 6 indicates. For very dusty or outdoor sites it is wise to ask for 6 on dust and to look carefully at water exposure.
Is tropicalisation covered by a standard?
Not under that name. It is expressed through standard requirements: an IP rating under IEC 60529, climatic tests such as IEC 60068-2-30 and operating ranges. That is what makes the offer and the delivery verifiable.
Does electronic equipment need a refrigerated container?
Not necessarily. Sealed packaging with desiccant is often enough, provided the goods are loaded dry. A refrigerated container is justified for equipment that is very sensitive to swings in temperature and humidity.

Sources

  1. IEC Webstore, « IEC 60529:1989+AMD1:1999+AMD2:2013 CSV » (October 2026)
  2. TÜV Rheinland, « IP testing » (October 2026)
  3. IEC Webstore, « IEC 60068-2-30:2025 » (August 2025)
  4. GDV, Transport Information Service (TIS), « Container climate » (October 2026)
  5. Hapag-Lloyd, « Container Specification » (October 2026)
  6. Sobetracom, références clients (September 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.