Sobetracom

Equipment sourcing · IT and broadcast

Buying a professional radio network for an NGO or project in Africa: DMR, licences and import

On a construction site, in a humanitarian camp, at a mine or for a security service, professional radio is the communication tool that keeps working when the mobile network is saturated or absent. For a buyer, the hard part is not the handset but the system: authorised frequencies, repeaters, coverage, accessories and import rules specific to radio equipment.

This guide helps specify a fleet of digital radios: how to read the tiers of the ETSI DMR standard, what to ask for in a repeater network, and what importing involves in Burundi and Guinea, two countries where Sobetracom has relays.

Updated on 21 October 2026

Tier I, II or III: reading the DMR standard

ETSI TS 102 361-1, version V2.7.1 of 2026-05, describes Digital Mobile Radio (DMR) in licensed land mobile bands. It distinguishes Tier I, radios with an integral antenna working in direct mode under a general authorisation; Tier II, individually licensed systems working direct or through a repeater base station; and Tier III, trunked systems run by a controller. The tiers are not interoperable with each other.

Tier II covers most projects: a fleet of handhelds, some vehicle mobiles and one or more repeaters. Tier III makes sense for large fleets across several sites. For secure communications between authorities, ETSI also maintains the TETRA standard, which is heavier to deploy.

Frequencies and repeaters: what TDMA changes

DMR uses a 2-slot TDMA structure: according to ETSI, one 12,5 kHz frequency carries two simultaneous calls, an efficiency equivalent to 6,25 kHz per channel. For the buyer, a single frequency assigned by the regulator can serve two work groups, which matters where assignments are scarce.

The specification should state the band (VHF or UHF) according to terrain and the frequencies obtained, the number and location of repeaters, backup power for them, any encryption, GPS location and IP linking of repeaters between sites. A coverage study supplied by bidders makes offers comparable.

Accessories, batteries and field conditions

A radio fleet comes with multi-unit chargers, spare batteries, cases, remote speaker microphones and antennas. Dust, rain and drops justify asking for a declared ingress protection rating and ruggedness, and for chargers matched to the country's voltage and sockets.

For air freight, IATA recommends shipping radios with lithium-ion batteries at no more than 30% state of charge, and makes that limit compulsory for spare batteries shipped on their own. Sending spare batteries by sea with the chargers often avoids a hold-up.

Importing into Burundi, installing in Guinea

In Burundi, importing electronic communications equipment for private use requires ARCT authorisation. An NGO provides its cooperation agreement with the Government, its registration and its tax number; a security company, its ministerial licence. Each unit is listed with brand, model, serial number and country of origin. The review invoice is issued within 10 working days, and the decision follows within 10 working days of payment.

In Guinea, order A/2010/353/MTNTI/SGG requires type approval for radio equipment and reserves commissioning and maintenance to licensed installers registered in the trade register and based in the country, with licences valid for 2 years. A licensed local installer therefore needs to be part of the project from the outset.

Frequently asked questions

Can Tier I radios be used licence-free in Africa?
The ETSI standard describes Tier I under a general authorisation within the European framework. In each African country, the regulator decides which frequencies can be used without an individual licence, so that should be checked with it before choosing Tier I equipment.
How does Sobetracom prepare a radio purchase?
We turn the need into a technical specification, consult several DMR manufacturers or distributors, compare coverage, accessories and warranty, then compile the serial-numbered list required for import. Our relays in Burundi and Guinea follow the ARCT or ARPT steps. The licensed customs broker then confirms the customs formalities.

Sources

  1. ETSI TS 102 361-1 V2.7.1 (May 2026)
  2. ETSI, TETRA (October 2026)
  3. ARCT Burundi, procédure de demande d'autorisation d'importation (October 2026)
  4. ARPT Guinée, arrêté A/2010/353/MTNTI/SGG (October 2026)
  5. IATA, Lithium Battery Guidance Document, 2026 (January 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.