Import guide · Gabon
Gabon’s PROGEC certificate of conformity: what AGANOR requires before shipment
Machinery, a generator or a batch of medical equipment bound for Gabon will, in most cases, need a certificate of conformity issued in the exporting country. This is PROGEC, the Gabonese conformity assessment programme run by the national standards agency AGANOR. Checks happen before departure: Bureau Veritas states that inspection on arrival is not permitted.
The details below come from datasheets published by the appointed inspection bodies (SGS, Bureau Veritas, Cotecna and Intertek) as of October 2026. They agree on the essentials but sometimes differ on dates and thresholds, so the most recent one, issued by SGS in April 2026, is used as the reference here.
Updated on 21 October 2026
A programme running since 2016
AGANOR was set up by Decree No. 0227/PR/MIMT of 23 June 2014 and reports to the ministry responsible for industry. A ministerial notice of 22 June 2015 announced the programme; according to an agency press release relayed by Bureau Veritas, it has applied since 20 February 2016, with penalties for consignments arriving after 20 May 2016 without a certificate. An ordinance of 16 July 2020 brought new provisions into force from 1 January 2021.
Several bodies are authorised. Intertek describes itself as one of the providers approved by AGANOR, and SGS gives 1 May 2026 as the start of its own mandate. Exporters can therefore apply to whichever body operates in their country.
Products covered and the value threshold
Coverage is broad. The SGS sheet lists machinery and electrical or electronic equipment (HS chapters 84, 85 and 94), civil engineering and chemical products, and medical and surgical instruments, cosmetics and toys (chapters 33, 34, 90 and 95). Used goods are included. Cotecna adds that food (chapters 1 to 24) and pharmaceuticals (chapter 30) are excluded.
SGS and Cotecna both apply a threshold of 3,000 euros FOB per shipment. Bureau Veritas lists exempt categories such as commercial samples, donations to recognised humanitarian organisations, disaster relief and goods bought with donations, external funds or loans. That last category matters for donor-funded projects, although the exemption has to be documented.
Choosing between routes A, B and C
Route A covers one-off shipments and unregistered sensitive goods: SGS charges 0.53 % of FOB value, with a minimum of 300 euros and a cap of 7,000 euros. Route B, at 0.45 %, suits registered suppliers who ship homogeneous products regularly. Route C, at 0.27 % with a 220 euro minimum, is reserved for licensed manufacturers of certified products.
A public buyer placing a single equipment order will most likely fall under route A. The fee is small compared with the contract value, but it should appear in the supplier’s quotation along with the time needed for inspection.
What the exporter has to supply
The exporter files a request for certification (RFC) with the pro forma or final invoice, the packing list and test reports. Reports should come from an ISO/IEC 17025 accredited laboratory, and Cotecna also asks for the product data sheet and the manufacturer’s ISO 9001 certificate. The US country guide notes that Gabon generally follows French standards and, having no accreditation body of its own, relies on European accreditation decisions. Markings must be in French for consumer goods and in French or English for professional equipment.
Without a certificate, AGANOR imposes a fine at clearance and Intertek warns that the shipment may be rejected. Working from Belgium, Sobetracom gathers these documents from the manufacturer and files the request before collection so the certificate travels with the goods. Fee scales and product lists are revised from time to time, so confirm the requirements with the inspection body and your customs broker before placing the order.
Frequently asked questions
- Are goods bought with donor funding exempt from PROGEC?
- Bureau Veritas lists goods acquired through donations, external funds and loans among the exemptions. The buyer must be able to prove it, for instance with the financing agreement, so check with the inspection body before shipping.
- Does second-hand equipment need a certificate too?
- Yes. SGS and Bureau Veritas both state that used goods fall under the programme when their customs code is within its scope.
- Can goods be inspected on arrival in Libreville instead?
- No. According to Bureau Veritas, destination inspection is not allowed; the certificate is obtained in the exporting country before loading.
Sources
- SGS, Vérification de la conformité avant expédition au Gabon (fiche PROGEC) (October 2026)
- Cotecna, Frequently Asked Questions about the Gabonese VOC Programme (PROGEC) (October 2026)
- Bureau Veritas, Gabon (PROGEC) Datasheet (October 2026)
- Bureau Veritas Verigates, Gabon PROGEC : Implementation of the PROGEC (October 2026)
- Intertek, Certificate of Conformity for Exports to Gabon (October 2026)
- U.S. International Trade Administration, Gabon Standards for Trade (October 2026)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
