Sobetracom

Import guide · Madagascar

Certificates of conformity in Madagascar: the BNM, product approval and the NMG mark

Unlike several countries in West and Central Africa, Madagascar does not appear, in the official sources we consulted, among the countries that require a general certificate of conformity issued before loading by an inspection company. Quality control of imported products rests with the national standards body, the Bureau des Normes de Madagascar (BNM), and with an approval procedure required for certain product categories.

This guide describes that framework as presented by the BNM and by the US government's commercial guide, and what it asks of the supplier in practice.

Updated on 21 October 2026

The BNM and its legal basis

The BNM is a public administrative body set up by decree No. 98-944 of 04 November 1998 and now governed by decree No. 2014-1570 of 30 September 2014, under the technical supervision of the trade ministry. The substantive regime comes from Law 97-024 of 14 August 1997 on standardisation and certification, supplemented by consumer protection law No. 2015-014 and by orders issued in 2019, including order No. 1735/2019 on product certification and order No. 1731/2019 on the national conformity mark.

According to the US commercial guide, Madagascar uses a mix of voluntary and mandatory standards and intends to make most of them mandatory. The BNM mainly follows ISO standards and represents the country in ISO, IEC, OIML and the Codex Alimentarius. Technical regulations are published in the Official Gazette, the first place to check whether a product is covered.

Approval on arrival, consignment by consignment

For products subject to approval, the BNM rule is that placing on the market requires a marketing authorisation from the relevant ministry, after a documentary review and a technical evaluation. The BNM examines the file, organises the audit and refers it to an award committee, which issues the certificate and authorises the NMG mark.

The decisive point for an importer is a single sentence of the procedure: for imports, the approval certificate is granted per consignment and allows customs clearance. It is therefore not a lasting product approval, as it is for local production (valid for 3 years), but a lot-by-lot check. The BNM states that the audit plan is sent at least 7 days ahead and that the report follows within 48 hours as a guide.

Two examples: solar kits and condoms

The BNM publishes two mandatory approvals in detail. Domestic solar kits are approved under interministerial order No. 30486/2021 of 30 November 2021; the file includes the importer's company documents, a sheet per product, test results or a certificate of conformity from an accredited laboratory or certification body, the invoice and the transport document. Male latex condoms fall under order No. 2166/2016, which makes their standard compulsory.

For other product families, specialised laboratories are involved: the US guide mentions LNTPB for construction materials, LML for legal metrology and LNRT for telecommunications equipment.

What the supplier should prepare

The lack of a general pre-shipment scheme does not remove the need for evidence of conformity. For an approved product, the importer has to present test reports or a certificate from an accredited body, and the check is carried out on the arrived lot. A test report drawn up in Europe against the relevant international standard makes the documentary review easier.

From Belgium, Sobetracom collects datasheets, test reports and accredited certificates from the manufacturer and sends them to the importer before departure. The list of regulated products changes with each order, so ask your licensed customs agent and the BNM whether your equipment is covered.

Frequently asked questions

Is a pre-shipment certificate of conformity needed to ship to Madagascar?
We found no general scheme of that kind in the official sources consulted. Some products, however, must be approved by the BNM, consignment by consignment, before clearance.
Is a CE certificate enough for a solar kit?
The BNM asks for test results or a certificate of conformity issued by an accredited laboratory or certification body, together with the invoice and transport document. An accredited test report carries more weight than a manufacturer's declaration.
Does approval of a first lot cover later shipments?
For imports the BNM grants the certificate per consignment, so each new shipment needs its own certificate.

Sources

  1. U.S. International Trade Administration, Madagascar Country Commercial Guide, Standards for Trade (October 2026)
  2. Bureau des Normes de Madagascar, « Présentation générale » (October 2026)
  3. Bureau des Normes de Madagascar, « Lois, décrets & arrêtés » (October 2026)
  4. Bureau des Normes de Madagascar, « Homologation des produits » (October 2026)
  5. Bureau des Normes de Madagascar, « Processus d'homologation » (October 2026)
  6. Bureau des Normes de Madagascar, « Homologation des kits solaires » (October 2026)
  7. Bureau des Normes de Madagascar, « Homologation des préservatifs masculins » (October 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.