Import guide · Togo
Product conformity in Togo: no pre-shipment certificate, but targeted controls
Unlike several of its neighbours, Togo runs no general pre-shipment conformity programme. No appointed inspection body issues a certificate at the port of loading without which goods would be turned away in Lomé. That does not mean anything goes. Requirements are spread across the standards body, legal metrology, line ministries and customs, and they bite mainly on higher-risk products.
This page pulls together the US commercial guide updated in 2026, decrees published in Togo's Official Journal and the Togo annex of the WTO review. The aim is to show when a test report or an authorisation has to travel with the shipment.
Updated on 21 October 2026
HAUQE and ATN: a young standards system
The framework goes back to framework law No. 2009-016 of 12 August 2009. Decree No. 2015-125/PR then organised the High Authority for Quality and Environment (HAUQE) and placed its technical bodies under it: the Togolese Standards Agency (ATN), the metrology agency (ATOMET), the accreditation committee (COTAG) and the quality promotion agency.
These bodies took time to get going. In 2017 the WTO noted that Togo had no national standards, relied on selected ISO standards and the Codex Alimentarius, and that each ministry adopted technical regulations without national coordination. The 2026 US guide describes a more developed system, with the ATN running voluntary or mandatory standards depending on risk and, in 2024, validating its 3 first national cement standards (TGN 001 to 003).
Risk-based checks rather than a blanket certificate
According to the same guide, most products enter Togo without mandatory testing. Goods that carry high health, safety or consumer risk, on the other hand, need testing and certification before import and sale. Recognised international standards such as ISO, IEC, ASTM or European norms are often accepted, which favours equipment designed for the EU market.
In practice, electrical or laboratory equipment bought in Europe usually arrives with adequate marking and a declaration of conformity, provided those documents are included in the file and are legible. Reinforcing steel has long been the exception: the WTO noted that importers were expected to have it tested at their own cost by the national building and public works laboratory.
Measuring instruments and sensitive goods: authorisations to plan for
Some regimes call for action before dispatch. Decree No. 2017-032/PR allows measuring instruments subject to legal metrology to be imported only if they match a model approved by the minister responsible for metrology, with a ministerial order listing the categories concerned. Scales, meters or other instruments used in trade should therefore be checked on this point when the model is chosen.
Separately, the US guide reports that a 2020 decree requires sensitive products to be pre-declared to the Ministry of Trade, and that permits must be in hand before shipment. Medicines, chemicals, foodstuffs and hydrocarbons each have their own authorisation regime.
What is left of destination inspection
For years Togo relied on COTECNA for a destination inspection programme focused on value and classification rather than technical conformity. In 2017 importers had to lodge an intention to import before arrival above 1.5 million FCFA by sea or air, and a levy of 0.75% of CIF value funded the scheme. The contract was then being renewed one year at a time, and the 2026 US guide no longer mentions it.
From Belgium, Sobetracom checks with the manufacturer which standards apply, gathers the relevant declarations of conformity and test reports, and tells the buyer which items need a prior authorisation.
Frequently asked questions
- Is a PVoC-style certificate of conformity needed to ship equipment to Togo?
- The sources consulted describe no such programme for Togo. Control works product by product: certification for high-risk goods, model approval for certain measuring instruments and permits for sensitive products.
- Is a European declaration of conformity enough?
- Often, yes: the US guide says European and IEC standards are generally accepted. Health and safety products and legal measuring instruments also need their own authorisation. Because the ATN is still extending its standards, ask the licensed customs broker what he will present to customs before the order is confirmed.
Sources
- Organisation mondiale du commerce, WT/TPR/S/362, annexe 8 Togo, section 3.3.2 (September 2017)
- Journal officiel de la République togolaise du 24 décembre 2015 (via FAOLEX) (December 2015)
- Journal officiel de la République togolaise du 31 mai 2017 (via FAOLEX) (May 2017)
- International Trade Administration, Togo Country Commercial Guide, Standards for Trade (June 2026)
- International Trade Administration, Togo Country Commercial Guide, Customs Regulations (June 2026)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
