Sobetracom

Import guide · Burkina Faso

Burkina Faso's national certificate of conformity: ABNORM, the 2025 list and COTECNA checks

Burkina Faso does not require a pre-shipment certificate of conformity issued in the exporting country, unlike some East African programmes. Conformity is mainly checked on arrival by the Agence burkinabè de normalisation, de la métrologie et de la qualité (ABNORM), which issues a national certificate of conformity (CNC). The CNC is required at customs for a list of products set by ministerial order.

A second and quite different mechanism also applies: the import verification programme run by COTECNA, which looks at value, quantity and classification. An equipment buyer therefore needs to know whether the goods are on the CNC list and must assemble technical documentation that will stand up to scrutiny.

Updated on 21 October 2026

A new legal basis since July 2025

The current framework is Decree No. 2025-0807/PRES/PM/MICA/MEF of 01 July 2025, which establishes a national certificate of conformity for consumer products. Under its Article 5, a joint order of the Industry and Economy ministries, signed in October 2025, sets the list of products concerned. It repeals Joint Order No. 2023-00175 of 24 April 2023 and earlier lists.

The list has 80 entries. Alongside food and building materials, it covers much of what equipment buyers purchase: headings 85.01 to 85.48 for electrical machinery and audiovisual equipment (with a few exclusions), solar equipment under 8419.12 and 85.41, weighing and measuring instruments under 84.23 and 90.28 to 90.32, fire extinguishers under 8424.10, lighting under 94.05 and iron and steel tubes under 73.03 to 73.10.

How ABNORM checks imports

The WTO review published in 2017 sets out the procedure. ABNORM, created in July 2012 under Law No. 011-2007/AN of 24 May 2007, checks non-food products against national and international standards through visual, documentary or laboratory controls. Up to 3 samples may be taken per import, and a further sample is drawn at the border before the CNC is issued.

At the time of that review there were 313 national standards, 311 of them mandatory. For a European manufacturer the practical lesson is clear: datasheets, test reports and declarations of conformity should travel with the goods, preferably in French. The US Department of Commerce guide, updated on 13 November 2025, also notes that some goods need additional technical certifications.

COTECNA verification: a separate check

The import verification programme (PVI) has been run by COTECNA since 2004, with the latest contract signed in August 2016 according to the WTO. Above 3 million FCFA, pre-shipment inspection was mandatory; below it, goods were inspected at destination. A verification certificate is attached to the customs declaration, and COTECNA's view on classification, value and origin is advisory only for the customs directorate.

The scheme is still in place in 2026: the customs statistical bulletin for the second quarter of 2026 lists the import verification contribution (CPVI) among the levies collected. Current thresholds and inspection arrangements should be confirmed for each shipment, since the WTO report dates from 2017.

Building a file that clears both checks

ABNORM examines the product; COTECNA mainly examines the transaction. A sound file therefore combines a detailed invoice consistent with the pro forma, a packing list, a certificate of origin and, for each listed item, the technical documents needed for the CNC. On 19 October 2026 ABNORM and the Faso FDA announced cooperation on import controls, a sign that responsibilities between regulators are still being clarified.

Before an order is placed, Sobetracom checks the likely tariff heading of each item and whether it appears on the CNC list, then gathers the test reports and declarations from the manufacturer. The file goes to the buyer's forwarder and customs broker.

Frequently asked questions

Is a generator or UPS subject to the CNC?
Headings 85.01 to 85.48 are on the 2025 list, with some exceptions, so most electrical equipment is covered. Your broker should confirm the exact heading for your product.
Do we need a certificate issued in Europe before shipping?
The CNC is issued in Burkina Faso by ABNORM after inspection. Manufacturer test reports do not replace it, but they support the documentary review and reduce the chance of further testing.
Could the product list change again?
It was replaced in 2023 and again in 2025. Before confirming an order, ask your licensed customs broker to check the list in force and ABNORM's requirements for your goods.

Sources

  1. ABNORM, Arrêté conjoint portant fixation de la liste des produits soumis au CNC (document numérisé) (October 2025)
  2. Organisation mondiale du commerce, Examen des politiques commerciales UEMOA, WT/TPR/S/362, annexe 2 Burkina Faso (October 2017)
  3. Direction générale des douanes du Burkina Faso, Bulletin statistique du deuxième trimestre 2026 (August 2026)
  4. ABNORM, « Pour la qualité et la sécurité des produits, l'ABNORM et le Faso FDA renforcent leur coopération » (October 2026)
  5. International Trade Administration (U.S. Department of Commerce), Burkina Faso Country Commercial Guide, Import Requirements & Documentation (November 2025)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.