Sobetracom

Import guide · Tanzania

Type approval of telecom and broadcast equipment in Tanzania: the TCRA procedure

In Tanzania, all electronic communications equipment must be type-approved by the Tanzania Communications Regulatory Authority (TCRA) before it enters the market. The scope is wide: it goes well beyond radio transmitters to laptops, printers, routers, servers, set-top boxes and smart TVs. For a project equipping a government office, a television studio or a connected health network, type approval is part of the procurement timetable.

The current framework stems from guidelines the TCRA issued in November 2023 under the Electronic and Postal Communications Act as amended in 2022 and 2020 regulations on equipment standards and e-waste. This guide sets out the rules as the TCRA describes them in its FAQ, as of October 2026.

Updated on 21 October 2026

Scope well beyond radio

The TCRA gives 4 broad groups as examples. Terminal equipment: mobile phones, tablets, modems, VHF and UHF radios, wireless modules, laptops, printers, scanners, GPS trackers, short-range devices and IoT devices. Office equipment such as PABX systems. Network equipment: switches, base stations, routers, servers and transmission gear. And broadcasting equipment: transmitters, studio-to-transmitter links (STL), smart TVs, IPTV, set-top boxes, digital radios and amplifiers.

Two details matter for broadcast projects. Receive-only equipment, such as GPS or broadcast receivers, still needs approval. So do active antennas containing electronic components, whereas passive antennas do not.

Approval per model, applied for online

Applications go through the TCRA's Online Type Approval System (OTAS). Before applying, the Tanzanite portal database should be checked to see whether the model is already approved; a model that already has approval does not need it again, which can save time where a well-known manufacturer has already been through the process. Certificates are issued model by model, never for a whole range, and remain valid as long as the product is unchanged; the manufacturer must report any changes.

Applicants can be the manufacturer or its representative, an authorised local or overseas company, or the local importer or distributor. Fees are set out on page 11 of the TCRA guidelines.

Samples, turnaround and labelling

According to the summary of the 2023 guidelines published by CAICT, set-top boxes and terminal equipment connected to cellular networks must submit samples for testing; other equipment only provides samples on request. A radio module imported separately must be approved in its own right. The TCRA states a maximum of 14 working days from submission of all required documents, excluding delays in payment or sample delivery caused by the applicant.

The device then carries the TCRA label, in Arial with a minimum font size of 5; electronic labels are allowed. For series-produced equipment, this marking should be agreed with the manufacturer before the batch is made.

Type approval and conformity are separate checks

TCRA approval does not replace the pre-shipment certificate of conformity. Electrical and electronic equipment is among the product families covered by the Tanzania Bureau of Standards' PVoC programme, which also requires labelling in English and/or Swahili. The same transmitter may therefore need both a TCRA certificate and a PVoC certificate.

Frequently asked questions

Can a Tanzanian TV studio import a transmitter without prior approval?
No. Transmitters and STL links are among the broadcasting equipment the TCRA lists as requiring type approval, and approval has to come before the product enters the Tanzanian market.
Does every variant of the same router need approval?
Certificates are issued per model and cannot cover several models. If variants carry different model numbers, each one should be checked on the Tanzanite portal and, where needed, approved.
How does Sobetracom handle type approval for a purchase bound for Tanzania?
From Belgium, Sobetracom checks whether the chosen models are already approved, gathers the test reports and labelling the manufacturer must supply, and coordinates the application with the designated applicant. Guidelines change, so they are checked with the TCRA and the buyer's clearing agent before shipment.

Sources

  1. Tanzania Communications Regulatory Authority (TCRA), Frequent Asked Questions on Type Approval of Electronic Communication Equipment (October 2026)
  2. CAICT (China Academy of Information and Communications Technology), « Tanzania: TCRA publishes guidance on type approval of electronic communication equipment » (November 2023)
  3. Bureau Veritas, Data Sheet Tanzania PVoC Programme, Rev. 14.7 (October 2023)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.