Import guide · Burkina Faso
Type approval for radio and telecom equipment in Burkina Faso: ARCEP approval
In Burkina Faso, a radio transmitter, a terminal connected to the public network or a wireless device cannot simply be imported. Law No. 061-2008/AN of 27 November 2008 on electronic communications makes such equipment subject to approval, also called type approval, granted by the Autorité de régulation des communications électroniques et des postes (ARCEP).
The procedure is mainly a document review: ARCEP examines the manufacturer's test reports rather than testing equipment itself, so the quality of the technical file is decisive. Detailed public information is scarce; this guide relies on an official ARCEP presentation to the ITU, the WTO review, the customs tariff and the factsheet of a specialist approvals firm.
Updated on 21 October 2026
What the 2008 law requires
A 2014 presentation by the head of ARCEP's approvals and type approval service summarises the key articles. Article 123 provides that terminal equipment may be supplied freely, with one major exception: once it is intended for connection to a public network, it must be approved. Article 130 goes further for radio: no device for transmitting or receiving signals may be manufactured, imported or sold for use in Burkina Faso without approval.
Approval is required in every case of supply: import, holding for sale, distribution free of charge or otherwise, and even temporary or personal use. A project radio network, microwave links or broadcast transmitters are therefore covered even if they are never resold.
Putting the file together
According to the same presentation, the application includes administrative documents (an application bearing a 500 FCFA stamp addressed to the ARCEP president, the company register extract and a form) and a technical part: equipment documentation, user manual, radio, EMC and safety test reports from accredited laboratories, and the manufacturer's declaration of conformity. A foreign manufacturer must have local representation, evidenced by a letter of representation.
IB-Lenhardt, a firm specialising in type approval, adds that ARCEP relies on European standards, that the local representative becomes the certificate holder and that reports prepared for the US FCC are not accepted. That favours equipment designed for the European market, provided full test reports are available.
Review, validity and renewal
ARCEP has no test laboratory: an officer studies the documents, writes a report and reaches a favourable or unfavourable conclusion. If the review is positive, an ARCEP decision serves as the type approval certificate for 5 years, renewable. The firm cited mentions an average turnaround of about 3 weeks and advises renewing at least 1 month before expiry through the same representative, otherwise the file is treated as new. These private indications are no substitute for confirmation from the regulator.
Audiovisual equipment is also subject to conformity checks on arrival. The 2025 list for the national certificate of conformity covers headings 85.01 to 85.48, including sound and image recording and reproduction equipment, as well as cameras and projectors under 90.07, 90.08 and 90.10.
Duties and preparing the purchase
Under the tariff published by Burkinabè customs, base stations under heading 8517.61 carry customs duty of 10 and a statistical fee of 1, while transmitters under 8525.50 carry duty of 5. VAT and levies are added according to the buyer's regime.
Sobetracom builds type approval into supplier selection from the start: favouring manufacturers that can provide complete European test reports, checking whether an approved model already exists, and passing the technical file to the local representative appointed by the buyer. Equipment is shipped only once ARCEP's decision has been obtained or the application is clearly under way.
Frequently asked questions
- Does Wi-Fi equipment for internal use need approval?
- According to ARCEP's presentation, approval also covers personal or temporary use of transmitting and receiving devices. Internal use is therefore not exempt unless a specific text says otherwise, which ARCEP can confirm.
- Is a representative in Burkina Faso needed to apply?
- Yes for a foreign manufacturer: local representation and a letter of representation are part of the file. According to IB-Lenhardt, the representative becomes the certificate holder.
- How recent is this information?
- The official presentation dates from 2014. Documents, fees and timescales may have changed, so confirm the procedure with ARCEP and then with your licensed broker before shipping.
Sources
- UIT (ITU-D), « Homologation des équipements : expérience du Burkina Faso », présentation ARCEP Burkina Faso, Tunis, juin 2014 (June 2014)
- Organisation mondiale du commerce, Examen des politiques commerciales UEMOA, WT/TPR/S/362, annexe 2 Burkina Faso (October 2017)
- IB-Lenhardt AG, Homologation de type pour Burkina Faso (prestataire privé) (October 2026)
- Direction générale des douanes du Burkina Faso, TEC CEDEAO SH 2022 (January 2022)
- ABNORM, Arrêté conjoint portant fixation de la liste des produits soumis au CNC (document numérisé) (October 2025)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
