Sobetracom

Import guide · Côte d'Ivoire

ARTCI type approval for telecom and radio equipment in Côte d'Ivoire

In Côte d'Ivoire, any equipment designed to connect to a telecoms network or to transmit radio signals must be type-approved by the telecoms/ICT regulator, ARTCI, before it is sold. ARTCI regulates electronic communications, the postal sector and personal data protection, and it keeps the list of approved models.

For a project buying handheld radios, microwave links, routers or embedded modules, approval is not a detail to settle at the end. According to ARTCI, releasing the equipment from customs requires its certificate.

Updated on 20 October 2026

The legal basis: a 2012 ordinance and a 2013 decree

Articles 88 and 89 of Ordinance No. 2012-293 of 21 March 2012 require radio equipment and equipment intended for connection to telecoms networks to be checked by ARTCI against essential requirements. Article 83 of the same ordinance obliges manufacturers, operators and traders to obtain approval before any sale.

Decree No. 2013-301 of 02 May 2013 sets the approval procedures for terminal and radio equipment and the accreditation of installers. Every approved model must be marked before it goes on sale, with marking fees collected by ARTCI.

Which equipment, which requirements

According to a presentation by ARTCI's standards and approval unit on 24 June 2014, the scope covers terminal equipment (mobile and fixed phones, routers, switches) and radio equipment (vehicle modules, short-range devices, transceivers). The essential requirements relate to health, safety, electromagnetic compatibility and use of the spectrum.

ARTCI recognises ITU, FCC and ETSI standards and at the time referred to the European RTTE directive, so equipment already assessed for the European market should have usable reports. Audiovisual equipment is also caught by conformity checks: the VoC programme bans analogue televisions and sets that do not meet broadcasting and compression standards.

The file and the stated timescales

The Homologations page of ARTCI's website provides the application form for terminal and radio equipment approval. The 2014 presentation listed the contents of the file: applicant form, manufacturer form, test reports, certificate of conformity, cover letter and a letter of partnership between manufacturer and applicant. Fees were then CFA 75,000 or CFA 150,000, and the regulatory timescale 1 month, about a week in practice.

ARTCI issues an approval certificate valid for 5 years, or a temporary admission certificate. These amounts and timescales date from 2014 and should be checked with the regulator when filing.

Forged certificates: check the official list

On 3 July 2024 ARTCI warned that forged approval certificates bearing its name were in circulation and announced legal action. It publishes lists of approved equipment on its website for 2020 to 2025, along with separate lists for short-range low-power devices (ECPF) and radio terminal equipment (ETRA).

Before accepting an offer, look up the exact model on these lists. A certificate shown by a reseller is not enough if the model does not appear there.

What Sobetracom checks

From Belgium, Sobetracom asks manufacturers for the test reports and certificates the file needs, checks whether the model already appears on the published lists and, if not, proposes an equivalent model that is already approved. Filing is the local applicant's responsibility, and ARTCI and the buyer's licensed customs agent should confirm the current procedure before shipment.

Frequently asked questions

Do handheld radios for an NGO in Côte d'Ivoire need type approval?
Transceivers are among the radio equipment covered by ARTCI approval. Conditions for using the frequencies are a further question to raise with ARTCI at the same time.
Is a European certificate enough?
No, but it helps: ARTCI recognises ETSI standards among others, and European test reports feed into the file. Ivorian approval must still be obtained.
How can I tell whether a model is already approved?
Check the lists of approved equipment on the Homologations page of ARTCI's website, which cover 2020 to 2025.

Sources

  1. ARTCI, « Homologation des équipements terminaux et équipements radioélectriques : cas de la Côte d'Ivoire », UIT, Tunis, 24 juin 2014 (October 2026)
  2. Connectionivoirienne.net, « Alerte ARTCI : de faux certificats d'homologation d'équipements télécoms en circulation », 3 juillet 2024 (October 2026)
  3. Autorité de régulation des télécommunications/TIC de Côte d'Ivoire (ARTCI), Homologations (October 2026)
  4. Autorité de régulation des télécommunications/TIC de Côte d'Ivoire (ARTCI) (October 2026)
  5. Bureau Veritas, fiche technique VoC Côte d'Ivoire, Rev. 11.2 (October 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.