Sobetracom

Equipment sourcing · Water and infrastructure

Water storage tanks for projects in Africa: volume, support, hygiene and kit tanks

A storage tank links water production with consumption. It covers hours without pumping, holds a reserve for breakdowns and gives pressure to a gravity network. Badly sized or badly designed, it becomes a contamination point or a wasted investment instead.

This page helps draft the storage part of a procurement file: how to set the volume, what to require for hygiene and maintenance, and how to handle support structure and transport, especially for tanks supplied as kits. It draws on WHO technical note No. 3, the UNICEF and Water Mission design guide and the product sheet of a widely used humanitarian tank kit.

Updated on 20 October 2026

Size from demand, not from available space

The UNICEF and Water Mission guide offers a simple rule: compare users' demand and system output hour by hour and month by month. The tank must absorb those gaps without interrupting supply. The guide adds two allowances to weigh case by case: emergency volume for interruptions such as source contamination, maintenance or extreme weather, and a margin for peak days.

It also warns against the opposite mistake. Oversized storage is expensive to build, and water standing for long loses quality. The tender should therefore state the useful volume justified by the designer, not a figure rounded up for safety.

Hygiene: what WHO expects of a tank

WHO technical note No. 3, on cleaning and disinfecting tanks, gives criteria that transfer directly into a specification. A tank must be easy to clean: accessible, without sharp corners where dirt collects. It must be covered, with an access point closed by a lockable lid. Permanent tanks have a washout valve at the base so deposits can be removed without using the normal outlet.

The note also says a reused tank must only have held food-grade liquids, never fuel or sewage. Before commissioning, chlorine disinfection needs 24 hours of contact, cut to 8 hours with a stronger solution. The start-up schedule should allow for it, and the order should include access, ladder, washout and a protected overflow.

Elevated support and hydraulic head

On a gravity network, tank height is part of the hydraulic design. The UNICEF guide requires an elevated support to carry the full tank and withstand the wind and seismic loads of the site, and the built height to match the height used in the pump head calculation. A tank set higher than planned cuts pump output; set lower, it cuts pressure at the tap.

The procurement file should therefore say who designs the support (tank supplier or local engineer), which loads apply and what foundations are expected.

Kit tanks: the steel tank example

Where the site is remote or the installation temporary, kit tanks avoid shipping a large empty volume. The Oxfam Supply Centre sheet for the 45 m³ kit shows the level of detail to require: the kit comes in 3 parts, corrugated steel sheets forming a round 6.44 m tank, a PVC liner with fittings, tools and level indicator, and a low-profile steel roof. A reinforced rubber liner is advised when the tank is used for water treatment. Plinth kits raise the tank, and an anchor bolt kit is needed on a concrete slab. The stated weight, 816 kg, and HS code 73090030 are what the forwarder and clearing agent need. According to Oxfam, the design has been used in the field since the 1980s and can last decades when erected under supervision and maintained.

From Belgium, Sobetracom consults makers of steel, polyethylene and precast concrete tanks, asks each for useful volume, packing list, weight and spares, and compares solutions in terms of transport to site. Relays in DR Congo, Burundi, Guinea and Nigeria follow delivery and erection; the tariff code and import documents should be confirmed with the licensed clearing agent before shipment.

Frequently asked questions

How large should the tank be on a solar-pumped network?
The UNICEF and Water Mission guide sets volume by comparing demand and output hour by hour, to cover hours without sun and overcast days, plus emergency storage where needed. It advises against excessive storage, which is costly and degrades water quality.
Can a tank that held another liquid be reused?
According to WHO note No. 3, only if it held food-grade liquids. A tank that held fuel or sewage must not be used for drinking water.

Sources

  1. OMS et WEDC, Technical Notes on Drinking-Water, Sanitation and Hygiene in Emergencies, n° 3 : Cleaning and disinfecting water storage tanks and tankers (July 2013)
  2. UNICEF et Water Mission, Solar Powered Water Systems Design and Installation Guide (2020), sections 5.1 à 5.3 (2020)
  3. Oxfam Supply Centre, fiche Oxfam Tank kit, 45 m³ (T45) (October 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.