Sobetracom

Equipment sourcing · Water and infrastructure

Chlorination equipment for drinking water in Africa: dosing, on-site generation and testing

Chlorination is still the last barrier in most drinking water networks: it disinfects and leaves a residual that protects water all the way to the tap. Yet the equipment that delivers it is often an afterthought. An undersized doser, a stock of product degraded by heat or a missing test kit is enough to make disinfection hit-and-miss.

This page covers the equipment: dosing systems, on-site chlorine generation, testing kit, and the transport constraints that follow from the product used. It draws on the WHO and WEDC technical notes for water in emergencies and on marine insurers' guidelines for carrying calcium hypochlorite.

Updated on 20 October 2026

Start from target residual and contact time

Sizing starts from the objective. According to WHO technical note No. 11, free residual chlorine at the collection point should sit between 0.2 and 0.5 mg/l, higher near the injection point and lower at the network extremities. At 18 °C and above, water should be in contact with chlorine for at least 30 minutes, which is why dosing is placed at the inlet of a tank or a long main. The same note sets two preconditions: turbidity below 5 NTU and pH between 6.8 and 7.2.

The tender therefore gives the supplier the flow to be treated (minimum and maximum), the measured chlorine demand of the water, available contact volume and target residual. It also fixes the location: the WHO note rules out chlorinating ahead of slow sand filtration, whose bacteria do the treatment.

Equipment families and their logistics

WHO note No. 6 separates complex gas chlorine dosing, suited to large works, from simpler liquid or solid compounds. For rural or small-town networks, offers usually fall into these families.

Dosing pumps inject a hypochlorite solution prepared in a tank; they need power and flow-paced control if flow varies. Tablet or erosion chlorinators need no energy, but dosing depends on flow and tablet quality. Electrochlorinators produce sodium hypochlorite on site by electrolysis of salt water: water, salt and electricity from grid or solar are enough, and no chlorine is shipped. In return they need good-quality salt, electrode maintenance and more thorough training.

The decision is a lifetime one: beyond the price of the unit, it turns on local availability of product or salt, power and spares for the whole project.

Testing: a purchase line of its own

Without testing, chlorination is not under control. WHO note No. 11 describes the DPD comparator test, quick and simple, and says where to test: just after dosing to check the equipment works, at the nearest collection point and at the furthest points of the network, where the residual is lowest. Kits are small and portable.

The order should include several comparators or photometers, a reserve of DPD reagents for the planned period, means of measuring pH and turbidity, and a monitoring log. Reagents have a limited shelf life, so quantities follow actual use with resupply planned.

Chlorine products: what shipping requires

If the chosen equipment uses calcium hypochlorite, its logistics are part of the purchase. The CINS and International Group of P&I Clubs guidelines classify it as a Class 5.1 oxidiser under the IMDG Code, as UN 1748 (dry, over 39 % available chlorine), UN 2880 (hydrated, 5.5 % to 16 % water) or UN 2208 (weaker mixture). It decomposes exothermically at high temperature, so the container must stay shaded and away from heat. The guidelines limit drums to 45 kg net, ban bags and cap loading at 14 tonnes net per container. The product must never be mixed with acid, which releases chlorine gas, and the WHO note adds that solid chlorine is made into a paste before being added to water.

From Belgium, Sobetracom consults makers of dosing pumps, chlorinators and electrochlorinators, compares offers on running cost as well as equipment and arranges dangerous goods shipment of products with the forwarder. Relays in DR Congo, Burundi, Guinea and Nigeria follow delivery; the import regime for chlorine products should be confirmed with the licensed clearing agent before anything ships.

Frequently asked questions

What residual chlorine should we aim for at the tap?
WHO technical note No. 11 gives 0.2 to 0.5 mg/l at the collection point for a small communal supply. Residual should also be checked at the network extremities, where it is lowest.
Does an electrochlorinator remove the need to import chlorine?
For the chlorine product itself, yes: the unit makes sodium hypochlorite on site from water, salt and electricity. It still needs a salt supply, reliable power and electrode spares.
Can calcium hypochlorite go in an ordinary container?
It travels as Class 5.1 dangerous goods. Marine insurers' guidelines call for drums of no more than 45 kg net, kept away from heat, and no more than 14 tonnes net per container.

Sources

  1. OMS et WEDC, Technical Notes on Drinking-Water, Sanitation and Hygiene in Emergencies, n° 11 : Measuring chlorine levels in water supplies (July 2013)
  2. OMS et WEDC, Technical Notes on Drinking-Water, Sanitation and Hygiene in Emergencies, n° 6 : Rehabilitating water treatment works after an emergency (July 2013)
  3. CINS et International Group of P&I Clubs, Guidelines for the Carriage of Calcium Hypochlorite in Containers, Version 3.0 (janvier 2018) (January 2018)
  4. Fiche de présentation d'un fabricant d'électrochlorateurs (WATALUX) (October 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.