Equipment sourcing · Industry
Industrial maintenance tools for projects in Africa: building the kit
On a rehabilitation project, tools often take second place to the big items: turbine, generator, transformers. Yet tools are what allow that equipment to be dismantled, adjusted and maintained for years. An incomplete or low-grade kit means stoppages, poorly tightened bolts and risks for technicians.
Sobetracom supplied industrial equipment and professional tools for the rehabilitation works at the Tshopo hydropower plant in the DRC, for ENABEL. This page uses that kind of project to describe how to specify a maintenance tool kit.
Updated on 20 October 2026
Start from the equipment and its maintenance routines
A tool kit is built from the machines to be maintained and their manuals: fastener sizes, specified tightening torques, manufacturer-specific tools, bearing and coupling removal. At Tshopo, according to CTB's terms of reference for the AFEK project, the plant had ACEC units of 6.15 MW commissioned in 1955 and an ALSTHOM unit of 6.5 MW dating from 1974, so one workshop has to maintain equipment of different generations and origins, sometimes with old dimensions.
The list is organised by family: mechanical hand tools, power tools, insulated tools for electricians, controlled tightening, pulling and lifting (hoists, slings, jacks), dimensional measurement and consumables. Each line states the reference or minimum characteristics, the quantity and the receiving workshop.
Insulated tools: IEC 60900
For work near live parts, hand tools must conform to IEC 60900:2018, which covers insulated, insulating and hybrid tools for nominal voltages up to 1 000 V AC and 1 500 V DC. The standard notes that these tools only contribute to safety when used by skilled persons following safe working methods. Require the corresponding marking on every tool and plan replacements: a tool with nicked insulation must be withdrawn.
In a plant that has been flooded in the past, as Tshopo was in 1961 and 1997 according to CTB, old cables and equipment often have insulation faults, so insulated tools and personal protective equipment belong in the kit, not in a separate purchase.
Controlled tightening and calibration
Turbine, generator and structural joints are tightened to specified torques. ISO 6789-1:2017 sets conformance testing and marking for hand torque tools, whether indicating (Type I) or setting (Type II). ISO 6789-2:2017 covers their calibration and the calculation of uncertainty. Ask for wrenches delivered with an ISO 6789-2 calibration certificate and organise recalibration: without a local laboratory, that means either a checking bench on site or periodic return to Europe.
For heavy bolting (flanges, large fasteners), torque multipliers and hydraulic wrenches should come with their pump and spare hoses.
Storage, traceability and delivery
Tools vanish quickly from a site. Lockable tool trolleys and cabinets, marking by workshop and a signed receiving inventory limit losses. In humid climates, plan corrosion protection and desiccant sachets in the cases.
After the 2013 rehabilitation, CTB reported output raised from 13 MW to 19.65 MW, together with support for plant maintenance; keeping such gains also depends on the tools left with the operating team. From Belgium, Sobetracom consolidates the lists, consults several suppliers, checks markings and certificates, groups packages and coordinates shipping, with support from its relays in the DRC. Import formalities should be checked with the licensed customs broker before each consignment.
Frequently asked questions
- Which standard should insulated electricians' tools meet?
- IEC 60900:2018, covering insulated, insulating and hybrid hand tools up to 1 000 V AC and 1 500 V DC.
- Should torque wrenches arrive calibrated?
- Yes, with a certificate to ISO 6789-2:2017. Periodic recalibration, on site or in Europe, also needs planning.
- How can an incomplete kit be avoided?
- By building the list from equipment manuals and maintenance routines, family by family, including manufacturers' special tools.
Sources
- Sobetracom, références clients (September 2026)
- CTB, Termes de référence des études d'exécution, réhabilitation de la centrale hydroélectrique de la Tshopo (projet AFEK), archive stanleyville.be (October 2026)
- CTB, Inauguration de la Centrale Hydroélectrique de la Tshopo (Kisangani), 04-07-2013, archive stanleyville.be (October 2026)
- Genorma, fiche EN IEC 60900:2018 (October 2026)
- Genorma, fiche ISO 6789-1:2017 (October 2026)
- Genorma, fiche ISO 6789-2:2017 (October 2026)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
