Sobetracom

Equipment sourcing · Industry

Power transformers for sites in Africa: specifying to IEC 60076

A distribution transformer is often the first item an industrial site must buy to connect to the medium-voltage grid, or to replace an ageing unit. It is also equipment that is rarely replaced: a specification error is paid for over decades in losses, overheating or downtime.

The IEC 60076 series provides the common framework, but each network has its own values. In Nigeria, the 2015 NESIS regulations give a precise example, useful for understanding what a local utility can require.

Updated on 20 October 2026

Values to agree with the utility

Rated power, primary network voltage, secondary voltage, vector group and tapping range should be confirmed with the distribution company before tendering. In Nigeria, the NESIS regulations require the Dyn11 vector group for polyphase distribution transformers and conformity with IEC 60076. They also set standard ratings from 25 kVA to 2500 kVA for 33 kV or 11 kV supply with 400 V secondary at 50 Hz, and a minimum operating efficiency of 95%.

Ask manufacturers for guaranteed no-load and load losses, short-circuit impedance and tolerances: at equal rating, these are what separate two offers over the service life.

Dry or oil-immersed, and what IEC 60076 says

IEC 60076-1:2011 covers both single-phase and polyphase power transformers. That edition added, among other things, a subclause on transport, a functional method of specification, safety and environmental requirements and condition monitoring facilities; a revision is being prepared as prEN IEC 60076-1:2026. IEC 60076-2:2011 sets temperature rise limits for liquid-immersed transformers, including the winding hot-spot limit.

Dry-type transformers fall under IEC 60076-11:2018, up to 72.5 kV. They avoid oil, suit indoor rooms and public buildings, and their standard now addresses altitude, climatic and environmental classes and fire behaviour. Oil-immersed units remain the usual choice for outdoor substations.

Heat and altitude: state the service conditions

Rated power is only guaranteed under the stated service conditions. The NESIS regulations, for instance, require power transformers to deliver rated output at a maximum ambient of 50 °C and a daily average of 35 °C, with top-oil temperature rise limited to 50 °C. These values show that an African network may demand more than the usual conditions in a European catalogue.

In the specification, give the site's maximum and average temperature, altitude, humidity, pollution (dust, salt near the coast) and installation type. The manufacturer can then adjust thermal design and insulation and state it in the offer.

Transport, testing and commissioning

An oil-immersed transformer travels filled with oil or under dry gas depending on size, and accessories such as radiators and bushings are sometimes removed. Require a shock recorder in transit, the list of routine factory tests with reports and, on arrival, oil and insulation checks before energising.

In Kisangani, the AFEK project run by CTB and inaugurated in 2013 renewed the transformers in 5 substations, installed 18 new substations and replaced 52 kilometres of cables laid since 1960, a reminder that a transformer is part of a whole network. Sobetracom itself supplied industrial equipment and tools for the rehabilitation works at the Tshopo plant for ENABEL. For transformers, we consult several manufacturers on a specification validated by the utility, compare losses, tests and manufacturing lead times, and coordinate freight; import requirements are confirmed with the licensed customs broker.

Frequently asked questions

Which vector group should a distribution transformer for Nigeria have?
The 2015 NESIS regulations require Dyn11 for polyphase distribution transformers, built to IEC 60076.
Dry-type or oil-immersed?
Dry-type units, covered by IEC 60076-11:2018, suit indoor rooms and reduce fire risk; oil-immersed units, with temperature rise covered by IEC 60076-2:2011, remain common outdoors. The choice depends on location, rating and the maintenance available.
Why state the site temperature?
Because rated power depends on service conditions. In Nigeria, NESIS uses a maximum ambient of 50 °C for power transformers.

Sources

  1. Genorma, fiche EN 60076-1:2011 (October 2026)
  2. Genorma, fiche EN 60076-2:2011 (October 2026)
  3. Genorma, fiche EN IEC 60076-11:2018 (October 2026)
  4. NERC, Nigerian Electricity Supply and Installation Standards Regulations 2015 (October 2026)
  5. CTB, Inauguration de la Centrale Hydroélectrique de la Tshopo (Kisangani), 04-07-2013, archive stanleyville.be (October 2026)
  6. Sobetracom, références clients (September 2026)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.