Equipment sourcing · Health
Buying hospital beds for a hospital or health centre in Africa
A hospital bed looks like the simplest item in a health project. It is often the bulkiest to ship, though, and a poor choice is paid for over years: side rails that trap patients, paint that rusts, castors nobody can replace, mattresses left off the order. WHO does not think in terms of a single bed either: its priority device list for maternal and child health separates the standard adult bed, the standard child bed, the intensive care bed and the delivery bed, each with its own mattress.
This guide draws on IEC 60601-2-52, that WHO list and the logistics catalogue of Médecins Sans Frontières, which describes beds designed for hospitals and for emergencies.
Updated on 21 October 2026
Which bed for which ward
For a general ward, the manual bed with an adjustable backrest is still the baseline. The model in the MSF catalogue has a chrome-plated frame, an epoxy-coated grid base, a manual backrest, a lying height of ± 55 cm and a 200 x 80 cm surface. MSF intends it for longer-term hospital programmes and points to a demountable field bed for emergencies.
The field bed follows a different logic: a maximum load of 120 kg, assembly without tools and packing in 1x1x1 m crates. Its canvas can be cut for use in a cholera treatment centre. Intensive care, paediatrics and the delivery room each need a bed of their own, as the WHO list makes clear, so the tender should be split into lots rather than one model for the whole hospital.
IEC 60601-2-52 and entrapment risk
The safety of medical beds is covered by IEC 60601-2-52, whose consolidated edition 1.1 of 2015-03 combines the 2009 first edition and its 2015 amendment. It replaced IEC 60601-2-38, published in 1996 for electric beds only, and also covers manually operated beds. One point matters for paediatric purchases: it applies to beds intended for adults.
The core of the standard deals with patient entrapment: test tools, side rail height, split or one-piece rails. It also requires a symbol showing the maximum patient weight and the safe working load. Ask the manufacturer for the test report against the standard rather than a bare declaration, and check with the standards body whether a newer edition is in force when the tender goes out.
Materials, castors and mattresses
In hot, humid climates, the finish decides how long a bed lasts. The chrome-plated frame and epoxy-coated base of the MSF bed show what to ask for: a surface treatment described precisely, able to withstand the disinfectants used on non-invasive medical devices. State whether castors are wanted too, since MSF treats them as an option to be requested when ordering.
The mattress is the classic omission. It is not included with the MSF manual bed, which lists it separately as a high-density foam mattress of 80x190 cm with a zipped cover. Specify dimensions, density and a washable, waterproof cover, and make sure the mattress matches the bed base.
Shipping and acceptance
A batch of beds quickly fills a whole container. The MSF field bed folds to about 80 cm x 10 cm x 80 cm, which transforms the freight cost. For standard beds, ask the manufacturer for the packed volume, the number of beds per container and whether they arrive assembled or flat-packed, with tools and assembly instructions.
From Belgium, Sobetracom approaches several manufacturers, compares bids on standards compliance, finish, accessories and shipping volume, then arranges shipment. In DR Congo, Burundi, Guinea and Nigeria our relays can follow delivery and assembly. The bed's customs classification and any formalities should be confirmed with your licensed customs broker before dispatch.
Frequently asked questions
- Does IEC 60601-2-52 apply to children's beds?
- Its scope covers medical beds intended for adults. For paediatrics, WHO lists a separate standard child bed, which should be specified on its own, asking the manufacturer which standards it applies to that model.
- Can a field bed equip a hospital?
- MSF designs it for emergencies, with a maximum load of 120 kg, and recommends the manual bed with backrest for hospital programmes. It suits a temporary extension or an epidemic response, not a permanent ward.
Sources
- IEC, IEC 60601-2-52:2009+AMD1:2015 CSV, extrait publié par VDE Verlag (March 2015)
- Médecins Sans Frontières, catalogue UniCat, fiche BED, HOSPITAL, manual, with back rest (October 2026)
- Médecins Sans Frontières, catalogue UniCat, fiche BED, FIELD HOSPITAL, demountable (April 2026)
- Organisation mondiale de la santé, Interagency list of priority medical devices for essential interventions for reproductive, maternal, newborn and child health (June 2016)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
