Sobetracom

Equipment sourcing · Health

Buying an operating table for a surgical theatre in Africa

The operating table is core theatre equipment: WHO lists it, with its accessories, among the priority devices for maternal and child health, next to theatre lighting and the electrosurgical unit. For a district hospital performing caesarean sections and general surgery, the decision turns less on comfort than on ruggedness, independence from the grid and ease of upkeep.

This guide draws on the record for IEC 60601-2-46:2023, the general-purpose table specification published by UNFPA and the logistics catalogue of Médecins Sans Frontières, which describes a table designed for remote surgical programmes.

Updated on 21 October 2026

Mechanical and hydraulic: the no-power option

A fully mechanical table depends on neither the mains nor a battery. The table listed by MSF is described as needing no electricity and suited to emergency and remote programmes: height is set by a foot-operated hydraulic pump, from 75 cm to 100 cm, and lateral tilt by hand crank. The UNFPA sheet takes the same line, with manual gear, lever and crank mechanisms, no gas springs and a hydraulic system filled with oil at the factory.

An electric table is more comfortable for the team, but it adds a battery, a circuit board and a motor to maintain. Where power cuts are frequent and biomedical technicians scarce, the mechanical and hydraulic version is often the safer choice.

Positions, load and dimensions to specify

The UNFPA sheet is a good starting point for a general-purpose tender: 4 areas and 5 sections, a backrest from 0 to +90°, Trendelenburg and reverse Trendelenburg of ±25°, lateral tilt of ±20°, a head section from +20 to −90° and removable leg sections in 2 independent parts. Height runs from 63–77 to 90–110 cm and the safe load is 135–165 kg. The MSF table states a maximum load of 200 kg and Trendelenburg from -30° to +30°.

Check the table top as well. A radiolucent top with cassette channels allows intra-operative X-rays without moving the patient. Finally, require standard-size stainless steel side rails so that accessories from other makers can be clamped on.

IEC 60601-2-46 and materials

Operating table safety is governed by IEC 60601-2-46. Its 2023 edition replaced the 2016 one and aligns with the general standard IEC 60601-1:2005 and its 2012 and 2020 amendments. It applies to tables with or without electrical parts, including transporters for detachable table tops. It does not cover delivery tables, medical beds or field tables, so a gynaecological table or delivery bed needs a separate specification.

On materials, UNFPA asks for a frame and rails in austenitic 18/10 stainless steel, an earthed stainless steel base, an epoxy resin top and a design that resists corrosion in tropical conditions. Mattresses should be antistatic, flame-retardant, fluid-proof and washable, and 4.5–5.5 cm thick.

Accessories, delivery and upkeep

A table delivered without accessories is of little use in theatre. The UNFPA sheet includes an anaesthesia screen, 2 lateral supports, 2 shoulder supports, 2 leg supports, 2 arm boards, 2 knee supports, a lithotomy crutch, a body strap, 4 spare clamps, a mattress set and silicone spray for upkeep. It calls for one unit per box, packaging test reports and EAN 128 labelling.

The MSF table weighs about 160 kg and ships assembled, so plan handling on arrival and a level floor in theatre. Its manual comes in French, English and Spanish, and MSF recommends cleaning at the start of every shift, after each operation and at the end of the day, with removable parts taken off and cleaned weekly.

How Sobetracom compares bids

From Belgium, we turn the theatre's needs into a specification based on these public sheets, approach several manufacturers and compare their bids on IEC 60601-2-46 compliance, the positions actually offered, included accessories and spare parts availability. We then arrange packing and shipment, and our relays in DR Congo, Burundi, Guinea and Nigeria can follow acceptance on arrival. The customs code and any device registration formalities should be confirmed with your licensed customs broker before loading.

Frequently asked questions

Does IEC 60601-2-46 cover delivery tables?
No. The 2023 edition expressly excludes delivery tables and beds, medical beds and examination couches. They fall under other standards and should be specified separately.
Does a district hospital need a radiolucent table?
It helps as soon as orthopaedic work is done or an image may be needed during surgery. UNFPA's general-purpose sheet provides for a radiolucent top with cassette channels, which makes it a reasonable requirement.

Sources

  1. Estonian Centre for Standardisation and Accreditation (EVS), fiche IEC 60601-2-46:2023 (May 2023)
  2. UNFPA Global Supply, fiche produit Table, operating theatre, with accessories (October 2026)
  3. Médecins Sans Frontières, catalogue UniCat, fiche OPERATING TABLE, mechanical / hydraulic (May 2026)
  4. Organisation mondiale de la santé, Interagency list of priority medical devices for essential interventions for reproductive, maternal, newborn and child health (June 2016)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.