Sobetracom

Equipment sourcing · Health

Buying an ultrasound scanner for a maternity unit or hospital in Africa

An ultrasound scanner is often the first imaging device a district hospital acquires. It uses no ionising radiation, needs few consumables, and WHO includes a mobile scanner with accessories in its priority device list for maternal and child health. The market still ranges from hand-carried units to full radiology systems, and the real differences lie in the probes, operator training and the ability to repair.

This guide draws on WHO's manual of diagnostic ultrasound, the general-purpose ultrasound sheet in its core medical equipment compendium and the 2024 edition of IEC 60601-2-37.

Updated on 21 October 2026

Probes before the console

WHO's manual is plain about it: a general-purpose scanner usually relies on 2 probes, a curved array of 3–5 MHz for the abdomen and obstetrics and a linear array of more than 5 MHz to 10 MHz for small parts and superficial structures. Frequency decides what can be seen: at 7.5 MHz only the front surface of the liver shows, whereas at 3.5 MHz the whole liver can be examined.

For a maternity unit the curved probe is essential, with an endocavity probe added depending on the team's practice. For a hospital that also wants to look at the thyroid, soft tissue or superficial vessels, the linear probe becomes necessary. So list the planned examinations in the tender, then the probes, and only then the console.

IEC 60601-2-37 and safety indices

Ultrasound safety falls under IEC 60601-2-37:2024, in force since 2 July 2024. It replaces the 2007 edition and its 2015 amendment, and its clause 201.11 on protection against excessive temperatures has been fully revised. Ask manufacturers for compliance with this edition or, failing that, the previous one and a timetable for updating.

WHO's manual notes that the scanner calculates and displays a mechanical index and a thermal index, in its TIS, TIC and TIB forms, in real time. A temperature rise of less than 1 °C above 37 °C is considered safe, but the embryo is particularly sensitive to prolonged Doppler examinations. Require both indices on screen and make sure training covers how to use them.

Power, shipping and care

WHO's compendium sets a single installation requirement: a stable power supply. Where the grid cuts out often, include a UPS or voltage regulator in the same lot, or choose a battery-powered portable unit. A full system described in the compendium measures about 1340x420x630 mm and weighs 75 kg, so it travels crated and needs more than one pair of hands at delivery.

The probe is the fragile and costly part. Cracks in its piezoelectric elements degrade resolution, which is why a probe holder, a cover and handling instructions matter. The manual asks for the probe to be wiped after every examination and disinfected daily, so check with the manufacturer which disinfectants it tolerates.

Training, warranty and service life

WHO's compendium gives a typical service life of 5 years and initial training by the manufacturer. That is short for an investment of this size, so it pays to negotiate a warranty that covers probes, parts availability and software updates. The manual also stresses that a trained operator matters as much as the machine.

From Belgium, Sobetracom helps turn the planned examinations into specifications, approaches several manufacturers, compares bids on probes, standards compliance and after-sales service, then arranges shipment. Our relays in DR Congo, Burundi, Guinea and Nigeria can follow acceptance and commissioning. Medical device registration rules vary from country to country, so have them confirmed by the relevant authority and your licensed customs broker before ordering.

Frequently asked questions

Is one probe enough for a maternity unit?
For routine obstetrics, the 3–5 MHz curved probe described by WHO covers most needs. A second, linear probe becomes useful if the hospital wants to examine superficial structures, and an endocavity probe depending on the team's practice.
Which standard should we ask manufacturers for?
The particular standard for ultrasound scanners is IEC 60601-2-37, whose 2024 edition replaces the 2007 one. It sits alongside the general standard for medical electrical equipment and whatever regulatory approval the destination country requires.

Sources

  1. Estonian Centre for Standardisation and Accreditation (EVS), fiche IEC 60601-2-37:2024 (July 2024)
  2. Organisation mondiale de la santé, Manual of diagnostic ultrasound, Volume 1 (June 2011)
  3. Organisation mondiale de la santé, Core medical equipment (WHO/HSS/EHT/DIM/11.03), fiches reproduites avec l'autorisation d'ECRI Institute (May 2011)
  4. Organisation mondiale de la santé, Interagency list of priority medical devices for essential interventions for reproductive, maternal, newborn and child health (June 2016)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.