Equipment sourcing
Buying raw materials for a project in Africa
Structural steel, cement, paving bitumen, fertiliser, copper, aluminium, plastic resins, water treatment chemicals, electrical cables and timber all weigh heavily in the budget of a construction site or plant in Africa, and quality gaps are often invisible on delivery. A loosely written steel grade, cement that has picked up moisture, fertiliser that caked in the hold or an undersized cable is paid for later, in strength, yield or safety. Each guide in this section starts from the applicable standards, the quality documents to require and the constraints of shipping and storing materials in a hot climate.
Sobetracom neither produces nor stocks these materials and does not claim past assignments in this sector. From Belgium, we apply our purchasing method: turning the design office's prescription into a specification, qualifying producers and distributors, comparing offers on identical terms, having the lot, its packaging and its documents inspected before departure, and following the shipment to site. Requirements in the destination country are always confirmed with the project owner and the relevant inspection authorities.
Steel
How to specify structural steel and rebar for Africa: EN 10025-2 grades, B500B, EN 10204 type 3.1 certificates, sea freight and site storage.
Cement
Choosing cement for a site in Africa: EN 197-1 designations, strength classes, sulfate-resisting cement, bulk or bagged supply and storage.
Bitumen
Specifying paving bitumen for a project in Africa: EN 12591 penetration grades, tests to require, modified binders, hot transport and safety.
Fertiliser
Buying fertiliser for an agricultural programme in Africa: guaranteed contents, ECOWAS rules, ammonium nitrate, 50 kg bags and storage in humid heat.
Copper
Specifying copper for a project in Africa: EN 1978 Cu-CATH-1 cathode, wire rod, busbar and tube standards, lot analysis, seals and container checks.
Aluminium
Specifying aluminium for a project in Africa: P1020A ingot, EN 573-3 alloys, EN 755 and 6060/6063 extrusions, EN 485-2 sheet, coastal coatings.
Plastic resins
Buying PE, PP or PVC pellets for Africa: grade and data sheet, ISO 1133 melt flow rate, density, storage in hot climates, EU pellet loss rules.
Water treatment chemicals
Buying coagulants and chlorine for drinking water in Africa: EN 878, EN 900 and EN 901, WHO chlorine residuals, Class 5.1 shipping, hot storage.
Electrical cables
Specifying low-voltage cables for Africa: IEC 60228 conductors, IEC 60502-1 power cables, derating in hot climates, tests and cable drums.
Timber
Specifying structural timber for Africa: EN 14081-1 and EN 338 grading, EN 335 use classes, termites, the EUDR, ISPM 15 and storage on site.
A project in Africa? Let's talk.
Tell us what you need and where it goes. We come back to you with first leads.
