Sobetracom

Equipment sourcing · Raw materials

Buying structural timber for a project in Africa: grading, durability and legality

Roof structures, formwork, framing and light bridges: timber is chosen for a job, and that job dictates mechanical strength, durability against fungi and termites, and a moisture content suited to the site's climate. Poorly graded or poorly protected timber warps, rots or gets eaten, often long before the structure's warranty runs out.

Sobetracom is neither a sawmill nor a timber merchant. From Belgium, we help project owners, NGOs and contractors turn the engineer's prescription into a purchase specification, look for qualified sawmills and suppliers, compare offers on the same grading and protection, and check grading, treatment and legality documents before shipment.

Updated on 21 October 2026

Structural timber: a grade marked on every piece

In Europe, rectangular structural timber is strength graded under EN 14081-1, either visually or by machine. The standard covers test methods, assessment and verification of constancy of performance, and marking of each piece. EN 338 links this grading to strength classes, each with characteristic strength, stiffness and density values, for softwoods and hardwoods alike.

For the buyer the consequence is straightforward: the specification must state the strength class required by the design, the sections and their tolerances, and require graded, marked timber. An offer of "construction timber" without a class or marking cannot be compared with anything. At inspection, we check the marking on a sample of pieces and its match with the supplier's documents.

Use classes, durability and termites

Mechanical strength says nothing about service life. EN 335 defines 5 use classes describing the timber's service situation, from dry interiors to permanent contact with ground or water, and the biological agents that threaten it; it stresses that a use class does not guarantee a lifespan. EN 350 classifies the natural durability of species and treated timber against fungi, dry-wood insects, termites and marine organisms.

In tropical Africa, termites make this choice decisive. The specification should match each element's use class with a naturally durable species or a suitable preservative treatment, and ask for the treatment certificate naming the product used. The design office decides; our role is to check that the selected offer complies.

Legality: the EUDR covers exports too

Timber bought in Europe for an African project is not exempt from EU legality rules. According to the European Commission, the Regulation on deforestation-free products (EUDR), which repeals the EU Timber Regulation (EUTR), requires any operator or trader placing timber on the EU market or exporting it from the EU to prove that it does not come from recently deforested land and has not contributed to forest degradation.

Amended in December 2024 and again in December 2025, it applies from 30 December 2026 for large and medium operators and from 30 June 2027 for micro and small operators, except those already covered by the EUTR, which are in scope from 30 December 2026. For any order shipped after those dates, we ask the supplier for the required traceability information and check who in the chain carries the due diligence obligation.

Packaging, dunnage and tropical storage

Dunnage and pallets travelling with a shipment fall under ISPM 15 of the International Plant Protection Convention, which covers packaging made from raw wood, dunnage included, to limit the spread of pests. Non-compliant dunnage can hold up an entire container on arrival, so we have it checked at loading.

On site, Bangladesh's building code, written for a monsoon climate, gives useful storage rules: stacks on treated supports at least 200 mm off the ground, 25 mm of air between adjacent pieces, stacks 1.5 m wide and 2.0 m high, 800 mm between stacks, all shielded from direct sun, hot wind and rain. These conditions limit splitting, warping and biological attack before installation.

Frequently asked questions

Can we buy ungraded timber and have it graded on site?
It is risky. Grading under EN 14081-1 relies on a method, factory production control and marking, and is done at the producer. On site a lot can be checked, but a missing grade cannot be reconstructed. For load-bearing work, buy graded and marked timber.
Is preservative treatment enough against termites?
That depends on the product, its penetration and the target use class. EN 350 helps assess the durability of a species or treated timber, but it does not replace efficacy testing of the product. Approved preservatives and installation rules in the destination country should be confirmed with the inspection body before ordering.

Sources

  1. Standard Norge, fiche de la norme NS-EN 14081-1:2016+A1:2019 (October 2026)
  2. Standard Norge, fiche de la norme NS-EN 338:2016 (October 2026)
  3. Standard Norge, fiche de la norme NS-EN 335:2013 (October 2026)
  4. Standard Norge, fiche de la norme NS-EN 350:2016 (October 2026)
  5. Commission européenne, DG Environnement, « Regulation on deforestation-free products » (October 2026)
  6. IPPC (Convention internationale pour la protection des végétaux, FAO), liste des normes ISPM (October 2026)
  7. Bangladesh National Building Code 2012, Part 7, Chapter 2, 2.2.1.3 « Timber » (2012)

This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.

A project in Africa? Let's talk.

Tell us what you need and where it goes. We come back to you with first leads.