Equipment sourcing · Raw materials
Buying copper for a project in Africa: cathodes, semi-finished products and checks
"Copper" covers very different purchases. A manufacturer that draws wire or casts needs cathodes of guaranteed purity; an electrical or water project usually buys bars, wire or tube, in other words copper already processed to a product standard. Either way the value per kilo is high, so checking quality and quantity matters as much as the negotiation.
Sobetracom is neither a producer nor a metals trader. From Belgium, we help the buyer write an unambiguous specification, look for qualified producers and fabricators, compare offers against the same standard and organise inspection, weighing and sealing before dispatch.
Updated on 21 October 2026
Cu-CATH-1 cathode, the market benchmark
For refined copper the reference is EN 1978, whose 2022 edition replaced the 1998 one. It defines 2 cathode grades, Cu-CATH-1 and Cu-CATH-2, and its Annex A sets out the sampling method for disputes between buyer and supplier. The London Metal Exchange's Copper Grade A contract is based on the Cu-CATH-1 grade of EN 1978:2022 and caps each impurity: 0.0025% for silver, 0.0010% for iron, 0.0005% for lead, and 0.0065% for the sum of listed elements.
Fastmarkets' price assessments also distinguish "grade A" cathode, registered and deliverable on the exchange, from "equivalent grade" cathode of comparable quality that is not registered. For a buyer the exact wording matters: "high-purity copper" says nothing about which standard, which edition or which form of proof applies.
Wire rod, busbar and tube: the product standard
Most projects buy semi-finished products rather than cathodes. Wire rod for drawing into electrical conductors falls under EN 1977, which covers high-conductivity copper supplied in round sections from 6 mm. Rod and bar for general electrical purposes, such as switchboard busbars, fall under EN 13601, covering bars from 2 mm to 40 mm thick and 3 mm to 250 mm wide, with sampling and test methods. Drawn round wire for conductors is covered by EN 13602.
For water, heating or domestic gas, seamless copper tubes are covered by EN 1057, from 6 mm to 267 mm outside diameter. The specification should name the standard, grade, temper and dimensions with tolerances, and we check each line of the fabricator's offer against it.
Test certificates worth asking for
For cathodes, we ask for the producer's lot analysis certificate showing brand and lot number, and check both against the limits of the standard named in the contract. An exchange-registered brand makes proof easier, but the contract still needs to say what happens in a dispute; Annex A of EN 1978 provides exactly that kind of sampling method.
For semi-finished products, the expected document is an inspection certificate giving composition, mechanical properties and, for electrical uses, measured conductivity. That last point deserves attention: less pure copper conducts less well, and the difference cannot be seen with the naked eye.
Weighing, seals and container tracking
Copper's value makes it a target. In 2020, trader Mercuria found on arrival in China that about 6,000 tonnes of blister copper loaded in more than 300 containers had been replaced with painted paving stones. According to Claims Journal, the cargo had been checked by an inspector before sealing, after which the containers were opened at night and real and fake seals were swapped.
The lesson applies to any metal purchase: inspection has to cover the loading itself, the weighing and the sealing, with photographs and recorded seal numbers, followed by a check of those numbers on arrival. We set up that chain of evidence with the inspection body and the forwarder, and tie payment to the documents it produces.
Frequently asked questions
- Is "equivalent grade" cathode acceptable for our plant?
- It can be, provided its composition meets the standard named in the contract and the analysis certificate can be verified. It is simply not registered on the exchange. The contract should then name the testing body and the sampling method to be used in a dispute.
- Should we require a minimum conductivity for switchboard busbars?
- Yes, that is the property that matters for this use. EN 13601 sets electrical requirements and the tests to verify them, and the lot certificate should report them. Compliance with the destination country's installation rules still needs confirming with the design office or inspection body.
Sources
- London Metal Exchange, « Special Contract Rules for Copper Grade A », composition chimique (October 2026)
- Standard Norge, fiche de la norme NS-EN 1978:2022 (October 2022)
- Fastmarkets, « Clarification of copper grade A cathode, equivalent-grade cathode premium assessment specifications » (October 2026)
- Standard Norge, fiche de la norme NS-EN 13601:2021 (October 2026)
- Standard Norge, fiche de la norme NS-EN 1977:2013 (October 2026)
- Standard Norge, fiche de la norme NS-EN 1057:2006+A1:2010 (October 2026)
- Claims Journal (Bloomberg), « Trader Buys $36 Million of Copper and Gets Painted Rocks Instead », 9 mars 2021 (March 2021)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
