Equipment sourcing · Raw materials
Buying aluminium for a project in Africa: ingot, extrusions, sheet and finishes
Aluminium is bought in very different forms. A local foundry or extruder needs primary ingot of guaranteed purity. A building, energy or transport project buys semi-finished products: extrusions for windows and light structures, sheet, strip and tube. Standards, quality documents and risks differ, so the specification must make plain which one is meant.
Sobetracom is neither a producer nor a metals trader. From Belgium, we turn the requirement into a specification, look for qualified producers, extruders and rolling mills, compare offers on the same alloy and temper designation, and have the lot and its packaging inspected before dispatch.
Updated on 21 October 2026
Primary ingot: P1020A and its equivalents
For raw metal, the London Metal Exchange's High Grade Primary Aluminium contract is the benchmark. It accepts aluminium meeting the P1020A designation of the international registration record, which caps silicon at 0.10%, iron at 0.20% and zinc at 0.03%, or the Chinese designation GB/T 1196-2017 Al99.70, which requires at least 99.70% aluminium.
An offer of "99.70% ingot" should therefore state which designation it refers to and come with a cast-by-cast analysis certificate. The specification can require an exchange-registered brand, which makes proof easier, or accept off-exchange metal provided the analysis is checked by an independent laboratory.
Semi-finished products: name the alloy and temper
For semi-finished products, the alloy is designated under EN 573-3, whose composition limits are identical to those registered with the Aluminum Association. The temper, reflecting heat treatment or work hardening, is designated under EN 515. An extrusion is specified with a designation such as EN AW-6060 followed by its temper, not with the word "aluminium" alone.
Extrusions fall under EN 755: part 2 sets mechanical properties, part 1 the inspection and delivery conditions, part 9 the tolerances of general profiles. For windows and façades, EN 12020-2 sets tighter tolerances for precision profiles in EN AW-6060 and EN AW-6063, with or without a thermal break. Sheet, strip and plate fall under EN 485-2. We check that each line of an offer refers to these standards and that the lot certificate reports them.
Finishes for coastal climates
Aluminium stands up well to atmospheric corrosion, but chlorides in a marine climate attack poorly prepared finishes. For powder coating, the Qualicoat label introduced a "Seaside Class" in 2008: pretreatment must remove at least 2 g/m² of surface instead of 1 g/m², taking off more contaminants. One manufacturer recommends it for exposed sites, for instance within 5 km of a coastline.
For a public building in a port city, the specification should state the type of finish, the label required and the class, and ask for the applicator's certificate. The choice between anodising and powder coating is made with the architect, bearing in mind the maintenance that can realistically be carried out on site.
Packaging, transport and storage
Coated or anodised profiles often arrive scratched when packaging was designed for a short trip. For sea freight followed by a long road leg inland, we ask for suitable protective film, interleaving between bars, reinforced crates or bundles, and bar lengths that fit the planned container. The pre-loading inspection checks appearance, marking and quantities by reference.
On site, storage should keep profiles out of rain and standing water, on dry supports. Bare aluminium should not stay in contact with other damp metals, and protective film should be removed as the manufacturer instructs, before long exposure to sunlight.
Frequently asked questions
- Can a 6063 extrusion replace the 6060 specified in the contract?
- Both alloys appear in EN 12020-2 for precision profiles, but their mechanical properties differ by temper. The substitution should be approved by the design office or the window system manufacturer, on the basis of EN 755-2 values.
- Which documents should come with a lot of coated profiles?
- The lot certificate showing alloy, temper and mechanical properties, the coating system data sheet and the applicator's certificate for the required label. Acceptance rules in the destination country, and any tests the project owner plans, should be agreed with the owner before ordering.
Sources
- London Metal Exchange, « Special Contract Rules for High Grade Primary Aluminium » (October 2026)
- Standard Norge, fiche de la norme NS-EN 573-3:2019+A1:2022 (October 2026)
- Standard Norge, fiche de la norme NS-EN 755-2:2016 (October 2026)
- Standard Norge, fiche de la norme NS-EN 12020-2:2016 (October 2026)
- Standard Norge, fiche de la norme NS-EN 485-2:2016+A1:2018 (October 2026)
- Glass Times, « Garnalex gains Qualicoat Seaside Class licence » (October 2026)
This page summarises public sources as of the date shown. It does not replace the official text: check it before committing to a purchase, a bid or a shipment.
